Universal 1/8 DIN 4 & 7 Channel Process Ramp & Soak Controllers by DwyerOmega

The CN1500 series is a compact, high-functionality unit offering the features of up to seven controllers in a single 1/8 DIN enclosure. Its careful design and compactness provide an unmatched cost/performance ratio. Each zone's input type is independently selectable, with scaling and offset allowing current and voltage signals to be converted and displayed in engineering units. Temperature can be displayed in Centigrade or Fahrenheit. Each zone boasts its own ramp/soak profile with up to 7 segments, supporting both ON/OFF and PID control for optimal process stability. Zones can be programmed for heating or cooling, with setpoint deviation, min/max readings, indefinite program hold, and automatic scanning and display of different zones. Three display modes are available. Euro-style plug-in connectors facilitate power, control, and process signal connections. Each zone has a programmable, three-digit engineering label. LED indicators show each controller's output status, and channel-to-channel scan time is programmable.

• Adjustable Channel Display Time: 1 to 999 seconds
• Cold Junction Error: ±0.5°C (10 to 45°C)/±0.9°F (50 to 113°F)
• Current Precision: ± 0.05%
• Cutout Dimensions: 45 x 22 mm
• Display Size: 10 mm (.39 in)
• Form Factor: 1/8 DIN
• Operating Frequency: 50/60 Hz
• Front Bezel Dimensions: 65 H x 117 W x 178 D mm
• Input Types: Note various options
• Offset Range: 0 to 100 mV, 0 to 10 mV, 0 to 20 mA
• On/Off Deadband: Programmable, 0 to FS
• Output Details: 5 Volts drive @ 50 mA open collector
• Proportional Band Range: 0 to 100% of span
• Ramp and Soak: 7-segment programmable per channel
• Reset Range: 0.00 to 50.00 repeats/minute