Liftmaster CPS-RPEN4 Monitored Retro-Reflective Photo Eye

LiftMaster’s CPS-RPEN4 Monitored Retro-Reflective Photo Eye is the versatile, flexible solution for commercial garage doors. The built-in polarized beam offers exceptional reliability by reducing interference from shiny objects. The simple turnkey solution requires power on one side only, and the NEMA 4X enclosure protects electronics from the environment. Our photoelectric eyes and edge sensor models are UL/cUL Listed for use with all LiftMaster Commercial Door Operators. The CPS-RPEN4 can be used as a primary and/or ancillary entrapment device and meets UL 325 2010 safety standards. Reflective Photo Eye Technology Available Accessories: Interface Card (CPS3CARD) Provides the option of adding a second set of monitored photo eyes or a monitored edge to a door opening. For extra door protection. Polarized beam for use in applications with highly–reflective surfaces NEMA 4X enclosure protects against direct water–spray and corrosion Retro-reflective sensor with horizontal alignment For indoor/outdoor use Maximum range of 50 feet When the sensor light is off, the eye is correctly aligned UL 325 requires all commercial door operators to be either constant pressure to close or be equipped with a primary external monitored entrapment protection device. The CPS-RPEN4 meets this requirement.

• The built-in polarized beam offers exceptional reliability by reducing interference from shiny objects. Maximum range of 50 feet
• For indoor/outdoor use -- Armored power cable connects easily to the LiftMaster 3-Button station for power
• The simple turnkey solution requires power on one side only, and the NEMA 4X enclosure protects electronics from the environment
• Detects obstructions and communicates with the reflector up to 50 ft. away in most commercial door applications
• LiftMaster model 65-7WIREL, Seven Conductor is an ideal complement to this photo eye. NEMA4 waterproof enclosure.