DIY Fly Agaric Lantern

Free DIY Fly Agaric Lantern instructions! Purchase matching materials online now! Fast delivery! Order now!

• Strengthen material: Adhere two transparent sheets together using craft glue along the 1 cm edges
• Prepare box base: Mark 1.5 cm from the edge of the round box's base and cut off the lower part (or use a second box lid)
• Create holes: Draw and cut a central hole (Ø 3 cm) on both the box base and lid using the circular template. Test light strings
• Attach light strings: Secure one light string in each lid's hole using hot glue. Ensure one string exits the top lid's switch and the other forms the lantern's base
• Position lids: Place lids along the long top and bottom edges of doubled transparent paper. Close sides outwards, top lid first, then base lid. Attach lower string's end to top lid with hot glue
• Form cylinder: Apply craft glue to paper's top and bottom edges, roll with lids, and let dry
• Create grass: Cut 'Grass' pattern from green moss rubber using the template
• Attach grass: Glue 'Grass' to the cylinder's bottom edge
• Lighten cap: Glue a transparent paper sheet to the underside of the mushroom cap to allow light to shine through
• Form cap: Roll mushroom cap's edges and seal with hot glue. Attach white moss rubber circles to the cap's red areas
• Join cap and cylinder: Place cap upside down in your lap, position cylinder inside, and glue together using hot glue. Use small glue points to prevent moss rubber softening
• Secure light string: Attach light string to the inner cap surface using hot glue on opaque areas. Tilt LEDs slightly for better light diffusion
• Finish with macrame: Thread macrame band through the opening as a loop. Congratulations! Your unique lucky mushroom lantern is complete